Review On The Types Of Plasterboard
When you are installing fixings on your walls, the most important thing that you need to know before you put in those fixings is the kind of wall that you exactly have. It is essential for you to have knowledge of this because it will affect how you are going to drill the hole and insert your screws, as well as your wall plugs and bolts.
If your internal walls are created through stud walling, it may be a challenge for you to install your fixings. Stud walling – either the modern plasterboard type or the old-fashioned lath and plaster – are traditionally not made for carrying loads. Drilling holes in these walls or even driving a nail through them in a haphasard manner will result in cracks on the plaster coating of the wall. If you are careless about the whole thing, you will not just end up with a weak mounting, but your walls may also require a bit of work in repairs.
Understand Your Wall Before Sticking Fixings
As mentioned above, it is a challenge to put fixings into stud walling. Before you can do it, you need to understand the structure of your wall first so that you can be sure that your installation will be strong enough and will not damage the structure of your wall.
You see, stud walling refers to either the lath and plaster type of wall or the kind made of plasterboard. The studs are the vertical elements in the frames making up your walls. In lath and plaster walls, the laths are narrow strips of wood that are nailed horisontally on the studs. These laths are covered up with a plaster layer later on. With plasterboard, the laths are skipped and plasterboard sheets are simply cut up and nailed on the studs.
The Fixings Challenge: Locating the Studs
In order to make sure that your mounting upon a stud wall is stable, secure and will not damage your wall, it is very important that you drill your holes directly onto the stud itself. But before you do this, you need to find the studs first.
The easiest way to find these studs is to knock on your wall. In plasterboard walls, the difference in the sound is very easy to detect. The sound in the area directly on the studs is more solid, whilst the areas away from the stud produce more hollow sounds when knocked.
The same, however, cannot be said of lathe and plaster walls. The studs would be deeply hidden by both the lathe and the plaster layer, so you would need to use more elbow grease in finding the studs. The technique used by builders to find the studs is to drill tiny holes along the wall at one-inch intervals until they have found the stud. Once they have discovered the first stud, they would measure 16 inches from this first stud and then drill another hole to locate the second stud.
You should always be careful when drilling holes in your stud walling to install your fixings. Always make those holes on the studs. Otherwise, your fixings will not be secure and you will end up damaging your wall.
plasterboard installation benchmarks and examples industry endorsed benchmarks for plasterboard. Read more…
jbdave’s d&c: Wow, that baby’s come early – now it gets tough ! The plasterers have kicked off, installing battens and getting ready for the plasterboard installation. The electrician is changing a few things around that I wasn’t happy with, and the ins… Read more…
ceiling insulation & plasterboard installation hello everyone, it’s been awhile since we last updated as we have been busy plus the fact that when we do go by to have a look at progress, it’s after work & hence pretty dark for photos. howe… Read more…
Tagged with: fix plasterboard
Filed under: British Gypsum
Like this post? Subscribe to my RSS feed and get loads more!
Leave a Reply
You must be logged in to post a comment.